American Rare Earths reports final Wyoming drill results as metal tests get under way
Four holes at Halleck Creek stayed above the project’s rare earth cutoff from near the surface to depths of about 200 metres. A separate pilot will test how much magnet material the concentrate can yield.
American Rare Earths reported assays from the final 12 holes of its Wyoming drilling program on November 16. The results bring the total to 18 holes at the Cowboy State Mine development area of Halleck Creek. The company now has the drilling data it plans to use for an updated mineral resource estimate to support its feasibility study.
In one hole, the company reported 199.95 metres from the surface averaging 4,242 parts per million of total rare earth oxides, or about 0.42% by weight. Across all 1,318 sampled intervals, the average was 3,327 parts per million. Neodymium and praseodymium oxides, the components of particular interest for permanent magnets, accounted for 22.7% of the total rare earth oxides across the program.
The assays measure what is in the rock. To test how much usable material can be recovered, the company has sent Halleck Creek concentrate to Novex. Under a program announced November 9, Novex will first test the processing conditions, then run a small continuous pilot to produce purified neodymium-praseodymium oxide. That oxide must meet the pilot’s specifications before the team can convert it to metal.
What to watch
American Rare Earths targets the first quarter of 2027 for the oxide and metal results. The updated resource estimate will help define how much material the mine could draw on. Recovery and purity data from the pilot will help buyers assess what that material could supply.
Sources
- American Rare Earths, November 16, 2026 · Final 12 drill holes and results across the Cowboy State Mine program ↗
- American Rare Earths, November 9, 2026 · Novex pilot, qualification steps and target dates ↗